Cảm biến WTT4SLC-3B2262A00
Thông số kỹ thuật cảm biến quang Sick WTT4SLC-3B2262A00
đại lý sick | đại lý WTT4SLC-3B2262A00 | sick việt nam
nhà phân phối sick | nhà phân phối WTT4SLC-3B2262A00
| Nguyên tắc chức năng | Photoelectric proximity sensor | ||||||||||||||||
| Nguyên tắc chức năng detail | Background suppression, Optical time-of-flight | ||||||||||||||||
| Dimensions (W x H x D) | 12.2 mm x 41.8 mm x 17.3 mm | ||||||||||||||||
| Housing design (light emission) | Rectangular | ||||||||||||||||
| Phạm vi cảm biến max. | 50 mm … 1,300 mm 1) | ||||||||||||||||
| Phạm vi cảm biến | 100 mm … 1,300 mm 2) | ||||||||||||||||
|
|||||||||||||||||
| Loại ánh sáng | Visible red light | ||||||||||||||||
| Nguồn sáng | Laser 6) | ||||||||||||||||
| Kích thước điểm sáng (khoảng cách) | Ø 4 mm (1,000 mm) | ||||||||||||||||
| Độ dài sóng | 658 nm | ||||||||||||||||
| Laser class | 1 (IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.11) | ||||||||||||||||
| Điều chỉnh |
Single teach-in button IO-Link |
||||||||||||||||
| Pin 2 configuration | External input, Teach-in input, Sender off input, Detection output, logic output | ||||||||||||||||
- 1) Object with 6 … 90 % remission (based on standard white to DIN 5033).
- 2) Adjustable.
- 3) Equivalent to 1 σ.
- 4) See characteristic curves repeatability.
- 5) 6% … 90% remission factor.
- 6) Tuổi thọ trung bình: 50,000 h at TU = +25 °C.
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | pp 2) |
| Current consumption | 25 mA 3) |
| Switching output | Push-pull: PNP/NPN |
| Output function | Factory setting: Pin 2 / white (MF): NPN normally open (light switching), PNP normally closed (dark switching), Pin 4 / black (QL1 / C): NPN normally closed (dark switching), PNP normally open (light switching), IO-Link |
| Switching mode | Light/dark switching |
| Output current Imax. | ≤ 50 mA |
| Response time | ≤ 5 ms 4) |
| Switching frequency | 100 Hz 5) |
| Input | MFin = multifunctional input programmable |
| Connection type | Male connector M8, 4-pin |
| Circuit protection |
A 6) B 7) D 8) |
| Protection class | III |
| Weight | 10 g |
| Housing material |
Plastic, MABS ABS |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Ambient operating temperature | –40 °C … +50 °C 9) |
| Ambient temperature, storage | –40 °C … +75 °C |
| Warm-up time | 10) |
| Initialization time | |
| UL File No. | E181493 |
- 1) Limit values. Operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Signal transit time with resistive load.
- 5) With light/dark ratio 1:1.
- 6) A = VS connections reverse-polarity protected.
- 7) B = output reverse-polarity protected.
- 8) D = outputs overcurrent and short-circuit protected.
- 9) As of Ta = 45 °C, a max.load current Imax = 50 mA is permitted.
- 10) Below Tu = –10 °C a warm-up time is necessary.
| MTTFD | 256 years |
| DCavg | 0 % |
| TM (mission time) | 20 years |
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM3 (230,4 kBaud) |
| Cycle time | 0.8 ms |
| Process data length | 4 Byte |
| Process data structure |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 = detection signal Qint.1 Bit 3 = detection signal Qint.2 Bit 4 = detection signal Qint.3 Bit 5 = detection signal Qint.4 Bit 6 = detection signal Qint.5 Bit 7 = detection signal Qint.6 Bit 8 = detection signal Qint.7 Bit 9 = detection signal Qint.8 Bit 10 … 15 = empty Bit 16 … 31 = distance value |
| VendorID | 26 |
| DeviceID HEX | 0x80021D |
| DeviceID DEC | 8389149 |
| Smart Task name | Base logics | ||||||
| Logic function |
Direct AND OR WINDOW Hysteresis |
||||||
| Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
||||||
| Inverter | Yes | ||||||
|
|||||||
Brand
Sick
Sản phẩm tương tự
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang