Cảm biến WTB2SC-2P1144S26
Thông số kỹ thuật cảm biến quang Sick WTB2SC-2P1144S26
đại lý sick | đại lý WTB2SC-2P1144S26 | sick việt nam
nhà phân phối sick | nhà phân phối WTB2SC-2P1144S26
| Nguyên tắc chức năng | Photoelectric proximity sensor |
| Nguyên tắc chức năng detail | Background suppression |
| Dimensions (W x H x D) | 7.7 mm x 21.8 mm x 13.5 mm |
| Housing design (light emission) | Rectangular |
| Phạm vi cảm biến max. | 4 mm … 110 mm 1) |
| Phạm vi cảm biến | 10 mm … 90 mm 1) |
| Loại ánh sáng | Visible red light |
| Nguồn sáng | PinPoint LED 2) |
| Kích thước điểm sáng (khoảng cách) | Ø 4.4 mm (60 mm) |
| Độ dài sóng | 640 nm |
| Điều chỉnh | IO-Link |
| Pin 2 configuration | External input, Teach-in input, Sender off input, Detection output, logic output |
| Special applications | Detecting small objects |
| Special features |
Switch-off delay, 32 ms Phạm vi cảm biến preset, 26 mm on white (90 % Remission) |
- 1) Object with 90% remission (based on standard white, DIN 5033).
- 2) Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | pp 2) |
| Current consumption | 20 mA 3) |
| Switching output | PNP 4) |
| Switching mode | Light switching 4) |
| Switching mode selector | Programmable |
| Output current Imax. | ≤ 50 mA |
| Response time | 5) |
| Response time Q/ on Pin 2 | 300 µs … 450 µs 5)6) |
| Switching frequency | 1,000 Hz |
| Switching frequency Q / to pin 2 | 1,000 Hz 6)7) |
| Connection type | Cable, 4-wire, 2 m 8) |
| Cable material | PVC |
| Cable diameter | Ø 3 mm |
| Circuit protection |
A 9) B 10) D 11) |
| Protection class | III |
| Housing material | Plastic, ABS/PC |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Description | IO-Link |
| Ambient operating temperature | –25 °C … +50 °C |
| Ambient temperature, storage | –40 °C … +75 °C |
| UL File No. | NRKH.E181493 |
| Repeatability Q/ on Pin 2: | 150 µs 6) |
- 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Parametrisable via IO-Link.
- 5) Signal transit time with resistive load.
- 6) Valid for Q on Pin2, if configured with software.
- 7) With light/dark ratio 1:1.
- 8) Do not bend below 0 °C.
- 9) A = VS connections reverse-polarity protected.
- 10) B = output reverse-polarity protected.
- 11) D = outputs overcurrent and short-circuit protected.
| MTTFD | 1,547 years |
| DCavg | 0 % |
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Cycle time | 2.3 ms |
| Process data length | 16 Bit |
| Process data structure |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 … 15 = empty |
| VendorID | 26 |
| DeviceID HEX | 0x800121 |
| DeviceID DEC | 8388897 |
| Smart Task name | Base logics | ||||||
| Logic function |
Direct AND OR WINDOW Hysteresis |
||||||
| Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
||||||
| Inverter | Yes | ||||||
| Switching frequency |
SIO Direct: 1000 Hz 1) SIO Logic: 1000 Hz 2) IOL: 900 Hz 3) |
||||||
| Response time |
SIO Direct: 300 µs … 450 µs 1) SIO Logic: 500 µs … 600 µs 2) IOL: 500 µs … 900 µs 3) |
||||||
| Repeatability |
SIO Direct: 150 µs 1) SIO Logic: 150 µs 2) IOL: 400 µs 3) |
||||||
|
|||||||
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
Brand
Sick
Sản phẩm tương tự
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang