Cảm biến WSE9C-3P2430A71
Thông số kỹ thuật cảm biến quang Sick WSE9C-3P2430A71
đại lý sick | đại lý WSE9C-3P2430A71 | sick việt nam
nhà phân phối sick | nhà phân phối WSE9C-3P2430A71
Thông số kỹ thuật chung Sick sensor
| Nguyên tắc chức năng | Through-beam photoelectric sensor |
| Dimensions (W x H x D) | 12.2 mm x 52.2 mm x 23.6 mm |
| Housing design (light emission) | Rectangular |
| Mounting hole | M3 |
| Phạm vi cảm biến max. | 0 m … 10 m |
| Phạm vi cảm biến | 0 m … 7 m |
| Loại ánh sáng | Visible red light |
| Nguồn sáng | PinPoint LED 1) |
| Kích thước điểm sáng (khoảng cách) | Ø 25 mm (1 m) |
| Độ dài sóng | 650 nm |
| Điều chỉnh | IO-Link |
| Pin 2 configuration | External input, Teach-in input, Detection output, logic output, Device contamination alarm output |
- 1) Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | pp 2) |
| Current consumption | 30 mA 3) |
| Switching output | PNP 4) |
| Switching mode | Light/dark switching 4) |
| Output current Imax. | ≤ 100 mA 5) |
| Response time | 6) |
| Response time Q/ on Pin 2 | 300 µs … 450 µs 6)7) |
| Switching frequency | 1,000 Hz 8) |
| Switching frequency Q / to pin 2 | ≤ 1,000 Hz 9) |
| Connection type | Male connector M12, 4-pin |
| Circuit protection |
A 10) B 11) C 12) |
| Protection class | III |
| Weight | 13 g |
| Housing material | Plastic, VISTAL® |
| Optics material | Plastic, PMMA |
| Enclosure rating |
IP66 IP67 IP69K |
| Test input sender off | Sender off |
| Ambient operating temperature | –40 °C … +60 °C |
| Ambient temperature, storage | –40 °C … +75 °C |
| UL File No. | NRKH.E181493 |
| Part number of individual components | 2055824 WS9-3D2430, 2088127 WE9C-3P2430A71 |
| Repeatability Q/ on Pin 2: | 150 µs 7) |
- 1) Limit values when operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Q = light switching.
- 5) At and above Tu 50 °C, a max. load current of Imax. = 50 mA is permitted.
- 6) Signal transit time with resistive load.
- 7) Valid for Q on Pin2, if configured with software.
- 8) With light/dark ratio 1:1.
- 9) With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.
- 10) A = VS connections reverse-polarity protected.
- 11) B = inputs and output reverse-polarity protected.
- 12) C = interference suppression.
Safety-related parameters
| MTTFD | 693 years |
| DCavg | 0 % |
Communication interface
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Cycle time | 2.3 ms |
| Process data length | 16 Bit |
| Process data structure |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 … 15 = measuring value |
| VendorID | 26 |
| DeviceID HEX | 0x8000E8 |
| DeviceID DEC | 8388840 |
Smart Task
| Smart Task name | Counter + debouncing | ||||||
| Logic function |
Direct WINDOW Hysteresis |
||||||
| Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
||||||
| Inverter | Yes | ||||||
| Maximum counting frequency |
SIO Direct: — 1) SIO Logic: 1000 Hz 2) IOL: 900 Hz 3) |
||||||
| Counter reset |
SIO Direct: — SIO Logic: 1,5 ms IOL: 1,5 ms |
||||||
| Min. Time between two process events (switches) |
SIO Direct: — SIO Logic: 450 µs IOL: 500 µs |
||||||
| Debounce time max. |
SIO Direct: — SIO Logic: 30.000 ms IOL: 30.000 ms |
||||||
|
|||||||
| Measuring value | Counting value | ||||||
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
Brand
Sick
Sản phẩm tương tự
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang