Cảm biến WSE8-N2131V
Thông số kỹ thuật cảm biến quang Sick WSE8-N2131V
đại lý sick | đại lý WSE8-N2131V | sick việt nam
nhà phân phối sick | nhà phân phối WSE8-N2131V
Thông số kỹ thuật chung Sick sensor
| Nguyên tắc chức năng | Through-beam photoelectric sensor |
| Dimensions (W x H x D) | 11 mm x 33.3 mm x 21 mm |
| Housing design (light emission) | Rectangular |
| Phạm vi cảm biến max. | 0 m … 45 m |
| Phạm vi cảm biến | 0 m … 20 m |
| Focus | Approx. 2.5° |
| Loại ánh sáng | Visible red light |
| Nguồn sáng | LED |
| Kích thước điểm sáng (khoảng cách) | Ø 900 mm (20 m) |
| Angle of dispersion | Approx. 2.5° |
| Độ dài sóng | 645 nm |
| Điều chỉnh | Potentiometer, 270° (Sensitivity) |
| Special applications | Hygienic and washdown zones |
- Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | ± 10 % 2) |
| Power consumption, sender | ≤ 15 mA |
| Power consumption, receiver | ≤ 20 mA 3) |
| Switching output | NPN |
| Switching mode | Light/dark switching |
| Switching mode selector | Selectable via light/dark selector |
| Signal voltage NPN HIGH/LOW | Approx. VS / |
| Output current Imax. | ≤ 100 mA |
| Response time | ≤ 0.5 ms 4) |
| Switching frequency | 1,000 Hz 5) |
| Angle of reception | Approx. 15° |
| Connection type | Connector M8, 3-pin |
| Circuit protection |
A 6) B 7) D 8) |
| Protection class | III |
| Weight | 83.6 g |
| Housing material | Stainless steel, Stainless steel V4A (1.4404, 316L) |
| Enclosure rating | IP69K |
| Items supplied | Stainless steel mounting bracket (1.4301/304) BEF-W100-A |
| Ambient operating temperature | –30 °C … +60 °C 9) |
| Ambient temperature, storage | –40 °C … +70 °C |
| UL File No. | FDA |
- 1) Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Signal transit time with resistive load.
- 5) With light/dark ratio 1:1.
- 6) A = VS connections reverse-polarity protected.
- 7) B = inputs and output reverse-polarity protected.
- 8) D = outputs overcurrent and short-circuit protected.
- 9) At an air humidity of 35 … 95%.
Classifications
| eCl@ss 5.0 | 27270901 |
| eCl@ss 5.1.4 | 27270901 |
| eCl@ss 6.0 | 27270901 |
| eCl@ss 6.2 | 27270901 |
| eCl@ss 7.0 | 27270901 |
| eCl@ss 8.0 | 27270901 |
| eCl@ss 8.1 | 27270901 |
| eCl@ss 9.0 | 27270901 |
| eCl@ss 10.0 | 27270901 |
| eCl@ss 11.0 | 27270901 |
| eCl@ss 12.0 | 27270901 |
| ETIM 5.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| UNSPSC 16.0901 | 39121528 |



