Cảm biến WSE4SL-3N1137
Thông số kỹ thuật cảm biến quang Sick WSE4SL-3N1137
đại lý sick | đại lý WSE4SL-3N1137 | sick việt nam
nhà phân phối sick | nhà phân phối WSE4SL-3N1137
Thông số kỹ thuật chung Sick sensor
Nguyên tắc chức năng | Through-beam photoelectric sensor | ||||||||
Phạm vi cảm biến max. | 0 m … 60 m | ||||||||
Phạm vi cảm biến | 0 m … 50 m | ||||||||
|
|||||||||
|
|||||||||
Điều chỉnh | Single teach-in button | ||||||||
Special applications | Detecting small objects | ||||||||
Part number of individual components | 2064096 WS4SL-3D1136 2064098 WE4SL-3N1132 | ||||||||
Mounting hole | M3 |
- 1) Tuổi thọ trung bình: 50,000 h at TU = +25 °C.
Các thông số liên quan đến an toàn
MTTFD | 350 years (EN ISO 13849-1) 1) |
DCavg | 0 % |
- 1) Mode of calculation: Parts-Count-calculation.
Dữ liệu điện
Điện áp nguồn UB | 10 V DC … 30 V DC 1) | ||||||||||
Gợn sóng | pp 2) | ||||||||||
Current consumption | 30 mA 3) | ||||||||||
Cấp bảo vệ | III | ||||||||||
|
|||||||||||
Switching mode | Light/dark switching 4) | ||||||||||
Output function | Complementary | ||||||||||
Circuit protection |
A 7) B 8) C 9) |
- 1) Limit values when operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Q = light switching.
- 5) Signal transit time with resistive load.
- 6) With light/dark ratio 1:1.
- 7) A = VS connections reverse-polarity protected.
- 8) B = inputs and output reverse-polarity protected.
- 9) C = interference suppression.
Mechanical data
Housing | Rectangular | ||||||||
Design detail | Slim | ||||||||
Dimensions (W x H x D) | 12.2 mm x 41.8 mm x 17.3 mm | ||||||||
Connection | Cable, 4-wire, 2 m 1) | ||||||||
|
|||||||||
|
|||||||||
Weight | 100 g |
- 1) Do not bend below 0 °C.
Ambient data
Enclosure rating |
IP66 IP67 |
Ambient operating temperature | –10 °C … +50 °C |
Ambient operating temperature extended | –30 °C … +55 °C 1)2) |
Ambient temperature, storage | –30 °C … +70 °C |
- 1) As of Ta = 50 °C, a max. supply voltage Vmax. = 24 V and a max. load current Imax. = 50 mA is permitted.
- 2) Operation below Tu –10 °C is possible if the sensor is already switched on at Tu > –10 °C, then cools down, and the supply voltage is subsequently not switched off. Switching on below Tu –10 °C is not permissible.