Cảm biến WSE11-2P2430S05
Thông số kỹ thuật cảm biến quang Sick WSE11-2P2430S05
đại lý sick | đại lý WSE11-2P2430S05 | sick việt nam
nhà phân phối sick | nhà phân phối WSE11-2P2430S05
Thông số kỹ thuật chung Sick sensor
| Nguyên tắc chức năng | Through-beam photoelectric sensor |
| Dimensions (W x H x D) | 15.6 mm x 48.5 mm x 42 mm |
| Housing design (light emission) | Rectangular |
| Phạm vi cảm biến max. | 0 m … 1.7 m |
| Phạm vi cảm biến | 0 m … 1.2 m |
| Focus | Approx. 1.5° |
| Loại ánh sáng | Visible red light |
| Nguồn sáng | LED 3) |
| Kích thước điểm sáng (khoảng cách) | Ø 220 mm (15 m) |
| Angle of dispersion | Approx. 1.5° |
| Độ dài sóng | 633 nm |
| Điều chỉnh | None |
| On delay | 0.5 s |
| Special features |
Slotted diaphragm On delay |
- Slotted diaphragm 1 mm in front of receiver.
- Slotted diaphragm 1.5 mm in front of sender.
- 3) Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | pp 2) |
| Power consumption, sender | ≤ 25 mA 3) |
| Power consumption, receiver | ≤ 20 mA 3) |
| Switching output | PNP |
| Output function | Complementary |
| Switching mode | Light/dark switching |
| Signal voltage PNP HIGH/LOW | Uv – 2.5 V / approx. 0 V |
| Output current Imax. | ≤ 100 mA |
| Response time | ≤ 2.5 ms 4) |
| Switching frequency | 200 Hz 5) |
| Connection type | Male connector M12 |
| Circuit protection |
A 6) C 7) D 8) |
| Protection class | II |
| Weight | 120 g |
| Special device | ✔ |
| Housing material | Plastic, ABS |
| Optics material | Plastic, PMMA |
| Enclosure rating |
IP66 IP67 IP69K |
| Test input sender off | TE to 0 V |
| Ambient operating temperature | –30 °C … +60 °C |
| Ambient temperature, storage | –40 °C … +75 °C |
| UL File No. | NRKH.E181493 & NRKH7.E181493 |
| Part number of individual components | 2061886 WS11-2D2430S05 2061887 WE11-2P2430S05 |
- 1) Limit values when operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Signal transit time with resistive load.
- 5) With light/dark ratio 1:1.
- 6) A = VS connections reverse-polarity protected.
- 7) C = interference suppression.
- 8) D = outputs overcurrent and short-circuit protected.
Classifications
| eCl@ss 5.0 | 27270901 |
| eCl@ss 5.1.4 | 27270901 |
| eCl@ss 6.0 | 27270901 |
| eCl@ss 6.2 | 27270901 |
| eCl@ss 7.0 | 27270901 |
| eCl@ss 8.0 | 27270901 |
| eCl@ss 8.1 | 27270901 |
| eCl@ss 9.0 | 27270901 |
| eCl@ss 10.0 | 27270901 |
| eCl@ss 11.0 | 27270901 |
| eCl@ss 12.0 | 27270901 |
| ETIM 5.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| UNSPSC 16.0901 | 39121528 |
Brand
Sick
Sản phẩm tương tự
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang