Cảm biến WLG4SC-3P2232VA00
Thông số kỹ thuật cảm biến quang Sick WLG4SC-3P2232VA00
đại lý sick | đại lý WLG4SC-3P2232VA00 | sick việt nam
nhà phân phối sick | nhà phân phối WLG4SC-3P2232VA00
Thông số kỹ thuật chung Sick sensor
Nguyên tắc chức năng | Photoelectric retro-reflective sensor | ||||||||
Nguyên tắc chức năng detail | Autocollimation | ||||||||
Phạm vi cảm biến max. | 0 m … 5 m | ||||||||
Phạm vi cảm biến | 0 m … 3 m | ||||||||
Polarisation filters | Yes | ||||||||
|
|||||||||
|
|||||||||
Điều chỉnh | Single teach-in button | ||||||||
Special applications | Hygienic and washdown zones, Detecting transparent objects | ||||||||
Housing design | Washdown | ||||||||
Pin 2 configuration | External input, Teach-in input, Sender off input, Detection output, logic output, Device contamination alarm output | ||||||||
AutoAdapt | ✔ |
- Reflector PL80A.
- Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
Các thông số liên quan đến an toàn
MTTFD | 1,222 years |
DCavg | 0 % |
Phương thức giao tiếp
|
Dữ liệu điện
Điện áp nguồn UB | 10 V DC … 30 V DC 1) | ||||||||||||
Gợn sóng | pp 2) | ||||||||||||
Current consumption | 30 mA 3) | ||||||||||||
Cấp bảo vệ | III | ||||||||||||
|
|||||||||||||
Attenuation along light beam | > 8 % | ||||||||||||
Switching mode | Light/dark switching | ||||||||||||
Output function | Complementary | ||||||||||||
Circuit protection | A, B, C 6)7)8) | ||||||||||||
Thời gian đáp ứng Q/ on Pin 2 | 300 µs … 450 µs 4)9) | ||||||||||||
Tần số chuyển đổi Q / to pin 2 | 1,000 Hz 10) | ||||||||||||
Special feature | Detecting transparent objects |
- 1) Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Signal transit time with resistive load.
- 5) With light/dark ratio 1:1.
- 6) A = VS connections reverse-polarity protected.
- 7) B = inputs and output reverse-polarity protected.
- 8) C = interference suppression.
- 9) Valid for Q on Pin2, if configured with software.
- 10) With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.
Dữ liệu cơ học
Thân | Rectangular | ||||||
Design detail | Slim | ||||||
Kích thước (W x H x D) | 15.25 mm x 44.9 mm x 22.2 mm | ||||||
Connection | Đầu nối male M8, 4-pin 1) | ||||||
|
|||||||
Cân nặng | 40 g |
- 1) Max. tightening torque: 0.6 Nm.