Cảm biến WL9LGC-3P2232B02
Thông số kỹ thuật cảm biến quang Sick WL9LGC-3P2232B02
đại lý sick | đại lý WL9LGC-3P2232B02 | sick việt nam
nhà phân phối sick | nhà phân phối WL9LGC-3P2232B02
Thông số kỹ thuật chung Sick sensor
| Nguyên tắc chức năng | Photoelectric retro-reflective sensor |
| Nguyên tắc chức năng detail | Autocollimation |
| Dimensions (W x H x D) | 12.2 mm x 52.2 mm x 23.6 mm |
| Housing design (light emission) | Rectangular |
| Mounting hole | M3 |
| Phạm vi cảm biến max. |
0 m … 4.5 m
|
| Phạm vi cảm biến |
0 m … 2 m
|
| Loại ánh sáng | Visible red light |
| Nguồn sáng | Laser 3) |
| Kích thước điểm sáng (khoảng cách) | Ø 1 mm (500 mm) |
| Độ dài sóng | 650 nm |
| Laser class | 1 (IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.1 |
| Điều chỉnh |
IO-Link Single teach-in button |
| Pin 2 configuration | External input, Teach-in input, Sender off input, Detection output, logic output, Device contamination alarm output |
| AutoAdapt | ✔ |
| Special applications | Detecting small objects, Detecting transparent objects |
| Special features | On delay, 40 ms |
- Reflective tape REF-AC1000.
- To ensure reliable operation, we recommend using REF-AC1000 reflective tape or reflective-tap reflectors such as P41F, PLV14-A, PLH25-M12, or PLH25-D12. Reflectors with large-scale triple structures must only be used if deemed suitable for the application.
- 3) Tuổi thọ trung bình: 50,000 h at TU = +25 °C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | pp 2) |
| Current consumption | 30 mA 3) |
| Switching output | PNP 4) |
| Output function | Complementary |
| Switching mode | Light/dark switching 4) |
| Output current Imax. | ≤ 100 mA |
| Response time | ≤ 0.5 ms 5) |
| Response time Q/ on Pin 2 | 300 µs … 450 µs 5)6) |
| Switching frequency | 1,000 Hz 7) |
| Switching frequency Q / to pin 2 | ≤ 1,000 Hz 8) |
| Connection type | Male connector M8, 4-pin |
| Circuit protection |
A 9) B 10) C 11) |
| Protection class | III |
| Weight | 13 g |
| Polarisation filter | ✔ |
| Housing material | Plastic, VISTAL® |
| Optics material | Plastic, PMMA |
| Enclosure rating |
IP66 IP67 IP69K |
| Special feature | Detecting transparent objects |
| Ambient operating temperature | –10 °C … +50 °C |
| Ambient operating temperature extended | –30 °C … +55 °C 12)13) |
| Ambient temperature, storage | –30 °C … +70 °C |
| UL File No. | NRKH.E181493 |
| Repeatability Q/ on Pin 2: | 150 µs 6) |
- 1) Limit values when operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Q = light switching.
- 5) Signal transit time with resistive load.
- 6) Valid for Q on Pin2, if configured with software.
- 7) With light/dark ratio 1:1.
- 8) With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.
- 9) A = VS connections reverse-polarity protected.
- 10) B = inputs and output reverse-polarity protected.
- 11) C = interference suppression.
- 12) As of Ta = 50 °C, a max. supply voltage Vmax. = 24 V and a max. load current Imax. = 50 mA is permitted.
- 13) Operation below Tu –10 °C is possible if the sensor is already switched on at Tu > –10 °C, then cools down, and the supply voltage is subsequently not switched off. Switching on below Tu –10 °C is not permissible.
Safety-related parameters
| MTTFD | 562 years (EN ISO 13849-1) 1) |
| DCavg | 0 % |
| TM (mission time) | 10 years |
- 1) Mode of calculation: Parts-Count-calculation.
Communication interface
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Cycle time | 2.3 ms |
| Process data length | 16 Bit |
| Process data structure |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 … 15 = empty |
| VendorID | 26 |
| DeviceID HEX | 0x800116 |
| DeviceID DEC | 8388886 |
Smart Task
| Smart Task name | Base logics | ||||||
| Logic function |
Direct AND OR WINDOW Hysteresis |
||||||
| Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
||||||
| Inverter | Yes | ||||||
| Switching frequency |
SIO Direct: 1000 Hz 1) SIO Logic: 1000 Hz 2) IOL: 900 Hz 3) |
||||||
| Response time |
SIO Direct: 300 µs … 450 µs 1) SIO Logic: 500 µs … 600 µs 2) IOL: 500 µs … 900 µs 3) |
||||||
| Repeatability |
SIO Direct: 150 µs 1) SIO Logic: 150 µs 2) IOL: 400 µs 3) |
||||||
|
|||||||
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
Brand
Sick
Sản phẩm tương tự
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang