Cảm biến WL9C-3P2432A70
Thông số kỹ thuật cảm biến quang Sick WL9C-3P2432A70
đại lý sick | đại lý WL9C-3P2432A70 | sick việt nam
nhà phân phối sick | nhà phân phối WL9C-3P2432A70
Nguyên tắc chức năng | Photoelectric retro-reflective sensor |
Nguyên tắc chức năng detail | Autocollimation |
Dimensions (W x H x D) | 12.2 mm x 52.2 mm x 23.6 mm |
Housing design (light emission) | Rectangular |
Mounting hole | M3 |
Phạm vi cảm biến max. | 0 m … 5 m 1) |
Phạm vi cảm biến | 0 m … 3 m 1) |
Loại ánh sáng | Visible red light |
Nguồn sáng | PinPoint LED 2) |
Kích thước điểm sáng (khoảng cách) | Ø 45 mm (1.5 m) |
Độ dài sóng | 650 nm |
Điều chỉnh |
IO-Link Single teach-in button |
Pin 2 configuration | External input, Teach-in input, Sender off input, Detection output, logic output, Device contamination alarm output |
- 1) Reflector PL80A.
- 2) Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
Supply voltage | 10 V DC … 30 V DC 1) |
Ripple | pp 2) |
Current consumption | 30 mA 3) |
Switching output | PNP 4) |
Output function | Complementary |
Switching mode | Light/dark switching 4) |
Output current Imax. | ≤ 100 mA 5) |
Response time | 6) |
Response time Q/ on Pin 2 | 300 µs … 450 µs 6)7) |
Switching frequency | 1,000 Hz 8) |
Switching frequency Q / to pin 2 | ≤ 1,000 Hz 9) |
Connection type | Male connector M12, 4-pin |
Circuit protection |
A 10) B 11) C 12) |
Protection class | III |
Weight | 13 g |
Polarisation filter | ✔ |
Housing material | Plastic, VISTAL® |
Optics material | Plastic, PMMA |
Enclosure rating |
IP66 IP67 IP69K |
Ambient operating temperature | –40 °C … +60 °C |
Ambient temperature, storage | –40 °C … +75 °C |
UL File No. | NRKH.E181493 |
Repeatability Q/ on Pin 2: | 150 µs 7) |
- 1) Limit values when operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Q = light switching.
- 5) At and above Tu 50 °C, a max. load current of Imax. = 50 mA is permitted.
- 6) Signal transit time with resistive load.
- 7) Valid for Q on Pin2, if configured with software.
- 8) With light/dark ratio 1:1.
- 9) With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.
- 10) A = VS connections reverse-polarity protected.
- 11) B = inputs and output reverse-polarity protected.
- 12) C = interference suppression.
MTTFD | 1,222 years |
DCavg | 0 % |
Communication interface | IO-Link V1.1 |
Communication Interface detail | COM2 (38,4 kBaud) |
Cycle time | 2.3 ms |
Process data length | 16 Bit |
Process data structure |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 … 15 = measuring value |
VendorID | 26 |
DeviceID HEX | 0x8000D8 |
DeviceID DEC | 8388824 |
Smart Task name | Time measurement + debouncing | ||||||
Logic function |
Direct WINDOW |
||||||
Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
||||||
Inverter | Yes | ||||||
Time measurement accuracy |
SIO Direct: — 1) SIO Logic: – 0,7 … + 0,7 ms ± 0,5 % of time measurement value 2) IOL: – 0.9 … + 0.9 ms ± 0.5% of the time measurement 3) |
||||||
Time measurement accuracy (e.g. accuracy for time measurement value = 1 s ) |
SIO Direct: — 1) SIO Logic: – 5,7 … + 5,7 ms 2) IOL: – 5,9 … + 5,9 ms 3) |
||||||
Resolution time measuring value | 1 ms | ||||||
Min. Time between two process events (switches) |
SIO Direct: — SIO Logic: 450 µs IOL: 500 µs |
||||||
Debounce time max. |
SIO Direct: — SIO Logic: 30.000 ms IOL: 30.000 ms |
||||||
|
|||||||
Measuring value | Time measurement value |
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.