Cảm biến WFL80-95B41CA00
Thông số kỹ thuật cảm biến siêu âm Sick WFL80-95B41CA00
đại lý sick | đại lý WFL80-95B41CA00 | sick việt nam
nhà phân phối sick | nhà phân phối WFL80-95B41CA00
| Nguyên tắc chức năng | Optical detection principle |
| Kích thước (W x H x D) | 10 mm x 118.5 mm x 110 mm |
| Thân design | Fork shaped |
| Fork width | 80 mm |
| Fork depth | 95 mm |
| Minimum detectable object (MDO) | 0.05 mm |
| Nguồn sáng | Laser, red |
| Laser class | I |
| Độ dài sóng | 670 nm |
| Điều chỉnh |
Teach-in button (Teach-in, sensitivity, light/dark switching, key lock) Cable (Teach-in dynamic) |
| Teach-in mode |
1-point teach-in 2-point teach-in Teach-in dynamic |
| Điện áp nguồn | 10 V DC … 30 V DC |
| Gợn sóng | |
| Current consumption | 40 mA |
| Switching frequency | 11 kHz |
| Response time | 60 µs |
| Stability of response time | ± 20 µs |
| Jitter | 22 µs |
| Switching output | Push-pull: PNP/NPN |
| Switching output (voltage) | Push-pull: PNP/NPN High = UV – |
| Switching mode | Light/dark switching |
| Output current Imax. | 100 mA |
| Input, teach-in (ET) |
Teach: U > 5 V … V Run: U |
| Initialization time | 40 ms |
| Time delay | Switch-off delay, 0 ms / 8 ms / 16 ms / 32 ms / 65 ms / 130 ms / 260 ms / 520 ms, adjustable via IO-Link (0 ms = default) |
| Connection type | Male connector M8, 4-pin |
| Cấp bảo vệ | III |
| Circuit protection |
UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression |
| Enclosure rating | IP65 |
| Weight | Approx. 36 g … 160 g |
| Tightening torque | Max. 3 Nm |
| Vật liệu thân | Metal, Aluminum |
- Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A.
- May not exceed or fall below Uv tolerances.
- Without load.
- With light/dark ratio 1:1.
- Signal transit time with resistive load.
- Reference voltage DC 50 V.
- Depending on fork width.
|
|||||||||
| Thời gian chu kỳ | 2.3 ms | ||||||||
| Cấu trúc dữ liệu xử lý A |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 = not used Bit 3 = Teach busy Bit 4 … 15 = empty |
||||||||
| Cấu trúc dữ liệu xử lý B |
Bit 0 = switching signal QL1 Bit 1 = Quality of Run Alarm Bit 2 = not used Bit 3 = Teach busy Bit 4 … 15 = empty |
||||||||
| Cấu trúc dữ liệu xử lý C |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 = not used Bit 3 = Teach busy Bit 4 … 5 = empty Bit 6 … 15 = measuring value |
||||||||
| Cấu trúc dữ liệu xử lý D |
Bit 0 = switching signal QL1 Bit 1 = Quality of Run Alarm Bit 2 = not used Bit 3 = Teach busy Bit 4 … 5 = empty Bit 6 … 15 = measuring value |
||||||||
| Ambient operating temperature | –20 °C … +50 °C |
| Ambient temperature, storage | –30 °C … +80 °C |
| Ambient light immunity | ≤ 10,000 lx |
| Shock load | According to EN 60068-2-27 |
| UL File No. | E191603 |
| eCl@ss 5.0 | 27270909 |
| eCl@ss 5.1.4 | 27270909 |
| eCl@ss 6.0 | 27270909 |
| eCl@ss 6.2 | 27270909 |
| eCl@ss 7.0 | 27270909 |
| eCl@ss 8.0 | 27270909 |
| eCl@ss 8.1 | 27270909 |
| eCl@ss 9.0 | 27270909 |
| eCl@ss 10.0 | 27270909 |
| eCl@ss 11.0 | 27270909 |
| eCl@ss 12.0 | 27270909 |
| ETIM 5.0 | EC002720 |
| ETIM 6.0 | EC002720 |
| ETIM 7.0 | EC002720 |
| ETIM 8.0 | EC002720 |
| UNSPSC 16.0901 | 39121528 |
Brand
Sick
Related products
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang