Cảm biến UFS3-37N417
Thông số kỹ thuật cảm biến siêu âm Sick UFS3-37N417
đại lý sick | đại lý UFS3-37N417 | sick việt nam
nhà phân phối sick | nhà phân phối UFS3-37N417
Nguyên tắc chức năng | Ultrasonic detection principle |
Kích thước (W x H x D) | 20 mm x 37.4 mm x 70 mm |
Thân design | Fork shaped |
Fork width | 2.6 mm |
Fork depth | 42.5 mm |
Minimum detectable object (MDO) |
Label size: 2 mm Label gap: 1 mm |
Label detection | ✔ |
Điều chỉnh |
Teach-in button (Teach-in, sensitivity, light/dark switching) Cable (Teach-in dynamic) |
Teach-in mode |
1-point teach-in 2-point teach-in Teach-in dynamic |
- Depends on the label thickness.
Điện áp nguồn | 10 V DC … 30 V DC |
Gợn sóng | |
Current consumption | 50 mA |
Switching frequency | 1.1 kHz |
Response time | 440 µs |
Jitter | 40 µs |
Switching output | NPN |
Switching output (voltage) | NPN: HIGH = VS / LOW ≤ 3 V |
Switching mode | Light/dark switching |
Output current Imax. | 100 mA |
Input, teach-in (ET) | Teach: U V |
Initialization time | 100 ms |
Connection type | Male connector M8, 4-pin |
Cấp bảo vệ | III |
Circuit protection |
UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression |
Enclosure rating | IP65 |
Weight | Approx. 100 g |
Vật liệu thân |
Metal, Zamak Plastic, Glass fiber reinforced plastic |
Indication |
LED indicator green: power on LED indicator, yellow: Status switching output Q |
- Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A.
- May not exceed or fall below Uv tolerances.
- Without load.
- With light/dark ratio 1:1.
- Signal transit time with resistive load.
- Output current minimal 0.03 mA.
- Reference voltage DC 50 V.
|
|||||||||||||||
Cấu trúc dữ liệu xử lý A |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 = switching signal QInt1 Bit 3 = switching signal QInt2 Bit 4 = alarm QoR Bit 5 = Teach busy Bit 6 … 15 = measured value |
||||||||||||||
|
Ambient operating temperature | +5 °C … +55 °C 1) |
Ambient temperature, storage | –20 °C … +70 °C |
Shock load | According to EN 60068-2-27 |
EMC | EN 60947-5-2 2) |
UL File No. | NRKH.E191603 & NRKH7.E191603 |
- 1) Do not bend below 0 °C.
- 2) The sensor complies with the Radio Safety Requirements (EMC) for the industrial sector (Radio Safety Class A). It may cause radio interference if used in a residential area.
Smart Task name | Base logics |