Cảm biến RAY26P-34862530A00
Thông số kỹ thuật cảm biến quang Sick RAY26P-34862530A00
đại lý sick | đại lý RAY26P-34862530A00 | sick việt nam
nhà phân phối sick | nhà phân phối RAY26P-34862530A00
Thông số kỹ thuật chung Sick sensor
| Nguyên tắc chức năng | Photoelectric retro-reflective sensor |
| Nguyên tắc chức năng detail | Autocollimation, Reflex Array |
| Dimensions (W x H x D) | 24.6 mm x 82.5 mm x 53.3 mm |
| Housing design (light emission) | Rectangular |
| Minimum object size | 5 mm, position-independent detection within the light array |
| Detection height | 55 mm |
| Phạm vi cảm biến max. | 0 m … 3 m |
| Distance of the sensor to reflector | ≥ 0 m |
| Conveyor belt suppression | Manual |
| Loại ánh sáng | Visible red light |
| Nguồn sáng | PinPoint LED 3) |
| Kích thước điểm sáng (khoảng cách) | 55 mm x 9 mm (1 m) |
| Độ dài sóng | 635 nm |
| Điều chỉnh |
BluePilot: Teach-in IO-Link |
| Pin 2 configuration | External Input (test), Teach-in, switching signal |
| AutoAdapt | ✔ |
| Special applications | Detecting objects with position tolerances, Detecting perforated objects, Detecting uneven, shiny objects, Detecting transparent objects, Detecting flat objects |
- Reflector PL80A.
- At minimum object size 5 mm.
- 3) Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | pp |
| Current consumption |
25 mA 2) 40 mA 3) |
| Switching output | PNP |
| Output: QL1 / C | Switching output or IO-Link mode |
| Output function | Factory setting: Pin 2 / white (MF): PNP normally open (dark switching), Pin 4 / black (QL1 / C): PNP normally closed (light switching), IO-Link |
| Switching mode | Light/dark switching |
| Switching mode selector | Via IO-Link |
| Signal voltage PNP HIGH/LOW | Approx. VS – 2.5 V / 0 V |
| Output current Imax. | ≤ 100 mA |
| Response time | ≤ 3 ms 4) |
| Switching frequency | 170 Hz 5) |
| Connection type | Cable with M12 male connector, 4-pin, 270 mm 6) |
| Cable material | PVC |
| Circuit protection |
A 7) B 8) C 9) D 10) |
| Protection class | III |
| Weight | 100 g |
| Housing material | Plastic, VISTAL® |
| Optics material | Plastic, PMMA |
| Enclosure rating |
IP66 IP67 |
| Ambient operating temperature | –40 °C … +60 °C 11)12) |
| Ambient temperature, storage | –40 °C … +75 °C |
| UL File No. | NRKH.E181493 & NRKH7.E181493 |
- 1) Limit values.
- 2) 16 V DC … 30 V DC, without load.
- 3) 10 V DC … 16 V DC, without load.
- 4) Signal transit time with resistive load in switching mode. Different values possible in COM2 mode.
- 5) With light/dark ratio 1:1 in switching mode. Different values possible in IO-Link mode.
- 6) Do not bend below 0 °C.
- 7) A = VS connections reverse-polarity protected.
- 8) B = inputs and output reverse-polarity protected.
- 9) C = interference suppression.
- 10) D = outputs overcurrent and short-circuit protected.
- 11) Avoid condensation on the front screen of the sensor and on the reflector.
- 12) Allowed temperature change after Teach +/- 20 K.
Safety-related parameters
| MTTFD | 709 years |
| DCavg | 0 % |
Communication interface
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Cycle time | 2.3 ms |
| Process data length | 16 Bit |
| Process data structure |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 … 15 = empty |
| VendorID | 26 |
| DeviceID HEX | 0x800218 |
| DeviceID DEC | 8389144 |
Smart Task
| Smart Task name | Base logics | ||||||
| Logic function |
Direct AND OR Window Hysteresis |
||||||
| Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
||||||
| Inverter | Yes | ||||||
| Switching frequency |
SIO Direct: 170 Hz 1) SIO Logic: 170 Hz 2) IOL: 170 Hz 3) |
||||||
| Response time |
SIO Direct: 3 ms 1) SIO Logic: 3 ms 2) IOL: 3 ms 3) |
||||||
| Repeatability |
SIO Direct: 1,5 ms 1) SIO Logic: 1,5 ms 2) IOL: 1,5 ms 3) |
||||||
|
|||||||
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
Brand
Sick
Sản phẩm tương tự
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang