Cảm biến DT1000-S11112
Thông số kỹ thuật cảm biến khoảng cách Sick DT1000-S11112
đại lý sick | đại lý DT1000-S11112 | sick việt nam
nhà phân phối sick | nhà phân phối DT1000-S11112
| Supply voltage Vs | DC 18 V … 30 V, reverse polarity protected |
| Ripple | ≤ 5 Vpp |
| Power consumption |
≤ 22 W, With heating switched off ≤ 35 W, With heating switched on |
| Initialization time | > 30 s |
| Thân material | Metal (Aluminum alloy (AlSi1) |
| Window material | Glass |
| Kiểu kết nối | Round connector M12 x 1 |
| Chỉ dẫn | Graphical, resistive touch display, status LEDs |
| Weight | 1,000 g |
| Kích thước (W x H x D) | 84 mm x 104.4 mm x 140.5 mm |
| Enclosure rating |
IP65 IP67 |
| Protection class | III (EN 61140) |
- May not fall short of or exceed VS tolerances.
- With external load.
- When plugged in with a suitable mating connector.
| Measurement principle | HDDM+ |
| Measuring range |
0.2 m … 155 m, 6 % remission 0.2 m … 460 m, 90 % remission |
| Target | Natural objects |
| Resolution | 0.001 mm … 100 mm, adjustable |
| Repeatability | ≥ 1 mm, See repeatability characteristic lines |
| Accuracy | Typ. ± 15 mm 8)9) |
| Response time | 3 ms … 384 ms |
| Measurement cycle time |
1 ms 4 ms 16 ms 64 ms 128 ms |
| Output time | ≥ 1 ms 10) |
| Light source |
Infrared light (905 nm, measuring laser) Visible red light (650 nm, Adjustment aid) |
| Laser class | 1, even with simultaneous operation of measurement and alignment laser (IEC 60825-1:2014, EN 60825-1:201 |
| Typ. light spot size (distance) |
5 mm x 20 mm (at 1 m) 1 20 mm x 20 mm (at 5 m) 1 35 mm x 25 mm (at 10 m) 1 150 mm x 50 mm (at 50 m) 1 290 mm x 80 mm (at 100 m) 1 570 mm x 140 mm (at 200 m) 1 |
| Filter |
Rain and snow filter Fog filter Moving average distance value Kalman filter Moving average speed value |
| Max. object temperature | +1,400 °C 1 |
| Additional function | Selection of relevant distance and signal level range, Selection of first or last echo in selected distance and signal level range |
| Average laser service life (at 25 °C) | 100,000 h 1 |
| Max. movement speed | 128 m/s |
- With max. ambient light 100 kLux sunlight.
- See measuring range diagram.
- Dependent on remission and measuring cycle time.
- Data interface resolution.
- Statistical error 1 σ, environmental conditions constant, min. warm-up time > about 15 min.
- 6 % … 90 % remission.
- Dependent on selected filter settings and measuring cycle time.
- 8) See measurement accuracy diagram.
- 9) At T = +23 °C and after warm-up time > about 15 min.
- 10) Depending on interface used.
- 1 See light spot size diagram.
- 1 For object temperatures > +1,200 °C, the use of the additional filter is required for high-temperature applications. The additional filter reduces the measuring range limit by approx. 25%.
- 1 Measuring laser.
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
| Network load class | III | ||||||||||
|
|||||||||||
| Digital input |
Internal pull-down circuit LOW switching voltage: max. 5 V Switching functions: deactivate measuring laser, activate alignment laser, preset |
||||||||||
|
|||||||||||
|
|||||||||||
- 1) Short-circuit protected, switching voltage UV – 4 V.
- 2) Internal pull-down switching, switching voltage HIGH: min. 13 V … max. supply voltage, switching voltage LOW: max. 5 V.
- 3) Max. load = (Uv – 7 V) / 21.5 mA.
| Ambient temperature, operation |
–40 °C … +55 °C 1) –40 °C … +95 °C, operation with cooling case |
| Ambient temperature, storage | –40 °C … +75 °C |
| Max. rel. humidity (not condensing) | ≤ 95 % |
| Effect of air pressure | 0.3 ppm/hPa |
| Effect of air temperature | –1 ppm/K |
| Temperature drift | Typ. 0.25 mm/K |
| Typ. Ambient light immunity | ≤ 100,000 lx |
| Mechanical load |
Shock: 30 g / 6 ms according to DIN EN 60068-2-27 (Ea), 6 axes Continuous shock: 25 g / 6 ms according to DIN EN 60068-2-27 (fatigue), 500 shocks, 6 axes |
- 1) At a temperature of –40 °C, a warm-up time of typ. 20 minutes is required (when supply voltage Vs = 24 V).
| ECl@ss 5.0 | 27270801 |
| ECl@ss 5.1.4 | 27270801 |
| ECl@ss 6.0 | 27270801 |
| ECl@ss 6.2 | 27270801 |
| ECl@ss 7.0 | 27270801 |
| ECl@ss 8.0 | 27270801 |
| ECl@ss 8.1 | 27270801 |
| ECl@ss 9.0 | 27270801 |
| ECl@ss 10.0 | 27270801 |
| ECl@ss 11.0 | 27270801 |
| ETIM 5.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| UNSPSC 16.0901 | 41111613 |
Brand
Sick
Related products
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang