Cảm biến DL100-13HA2112

Part no.: Cảm biến Sick 1060050

Sick

Description
Brand

Cảm biến DL100-13HA2112

Thông số kỹ thuật cảm biến khoảng cách Sick DL100-13HA2112
đại lý sick | đại lý DL100-13HA2112 | sick việt nam
nhà phân phối sick | nhà phân phối DL100-13HA2112

Mechanics/electronics

Supply voltage V_s	DC 18 V … 30 V, limit values
Ripple	5 V_pp
Initialization time	Typ. 1.5 s
Thân material	Metal (Aluminum die cast)
Window material	Plastic (PMMA)
Kiểu kết nối	Male connector, M12, SPEEDCON™ compatible
Chỉ dẫn	6 digit 5 x 7 dot matrix display, LEDs
Weight	Approx. 800 g (with mounting bracket: approx. 1,600 g)
Current consumption	At 24 V DC
Kích thước (W x H x D)	69.4 mm x 82.5 mm x 100.2 mm
Modulation frequency	Fix
Enclosure rating	IP65
Protection class	III

May not fall short of or exceed V_S tolerances.
After loss of reflector

Performance

Measuring range	0.15 m … 220 m, on “diamond grade” reflective tape
Target	Reflector
Resolution	0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm
Repeatability	2.5 mm, at dead time 10 ms 1.25 mm, at dead time 30 ms
Accuracy	± 5 mm
Response time	2 ms
Measurement cycle time	1 ms
Output time	1 ms
Light source	Laser, red visible red light
Laser class	2, complies with 21 CFR 1040.10 and 1040.11 except for the conformance according to “Laser Notice No. 50” from June 24, 2007 (IEC 60825-1:2014, EN 60825-1:201
Typ. light spot size (distance)	5 mm + (2 mm x distance in m)
Max. movement speed	10 m/s
Heating	✔

Statistical error 1 σ, environmental conditions constant, depending on operating mode.
From 150 mm … 180 mm measuring range the accuracy can reach ± 4 mm.
Average service life: 100,000 h at T_U = +25 °C.

Interfaces

PROFINET

✔

Đầu ra kỹ thuật số
Number	2 ¹⁾
Kiểu	Push-pull: PNP/NPN
Function	Distance: Distance switching output
	Speed; Speed output
	Service: Warning message as the sensor ages, if the damping value is exceeded (for example when contaminated, if the permitted interior device temperature is exceeded or undercut, if the measured value has a plausibility error, if the laser is not ready for operation, if the heating is switched on
	Laser off
	Preset
Maximum output current I_A	≤ 100 mA ²⁾

Multifunctional input (MF)

1 x MF1 ³⁾

¹⁾ HIGH = > V_S – 3 V / LOW =
²⁾ Max. 100 nF/20 mH.
³⁾ HIGH > 12 V / LOW

Ambient data

Electromagnetic compatibility (EMC)	EN 61000-6-2, EN 61000-6-4 ¹⁾
Ambient temperature, operation	–40 °C … +55 °C, operation with heating ²⁾ –40 °C … +75 °C, operation with cooling case
Ambient temperature, storage	–40 °C … +75 °C
Effect of air pressure	0.3 ppm/hPa
Effect of air temperature	1 ppm/K
Temperature drift	Typ. 0.1 mm/K
Typ. Ambient light immunity	≤ 100,000 lx
Mechanical load	Shock: (EN 600 68-2-27) Sine: (EN 600 68-2-6) Noise: (EN 600 68-2-64)

¹⁾ This is a Class A device. This device can cause radio interference in living quarters.
²⁾ Temperatures

Classifications

ECl@ss 5.0	27270801
ECl@ss 5.1.4	27270801
ECl@ss 6.0	27270801
ECl@ss 6.2	27270801
ECl@ss 7.0	27270801
ECl@ss 8.0	27270801
ECl@ss 8.1	27270801
ECl@ss 9.0	27270801
ECl@ss 10.0	27270801
ECl@ss 11.0	27270801
ETIM 5.0	EC001825
ETIM 6.0	EC001825
ETIM 7.0	EC001825
ETIM 8.0	EC001825
UNSPSC 16.0901	41111613

Cảm biến DL100-13HA2112

Cảm biến DL100-13HA2112

Brand

Sick

Related products

Login