Cảm biến RAY10-AB1GBLA00
Thông số kỹ thuật cảm biến quang Sick RAY10-AB1GBLA00
đại lý sick | đại lý RAY10-AB1GBLA00 | sick việt nam
nhà phân phối sick | nhà phân phối RAY10-AB1GBLA00
Thông số kỹ thuật chung Sick sensor
| Nguyên tắc chức năng | Photoelectric retro-reflective sensor |
| Nguyên tắc chức năng detail | Dual lens, Reflex Array |
| Dimensions (W x H x D) | 21.5 mm x 36 mm x 37.7 mm |
| Housing design (light emission) | Rectangular |
| Minimum object size | 5 mm, position-independent detection within the light array |
| Detection height | 25 mm |
| Phạm vi cảm biến max. | 0 m … 1.5 m |
| Distance of the sensor to reflector | 0.3 m … 1.5 m |
| Loại ánh sáng | Visible red light |
| Nguồn sáng | PinPoint LED |
| Kích thước điểm sáng (khoảng cách) | 37 mm x 12 mm (1 m) |
| Độ dài sóng | 635 nm |
| Điều chỉnh |
Potentiometer IO-Link |
| Pin 2 configuration | External Input (test), Teach-in, switching signal |
| Special applications | Detecting transparent objects, Detecting perforated objects, Detecting uneven, shiny objects, Detecting objects with position tolerances, Detecting flat objects |
- Reflector P250F.
- Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | pp |
| Current consumption | 30 mA 2) |
| Switching output | Push-pull: PNP/NPN |
| Output: QL1 / C | Switching output or IO-Link mode |
| Output function | Factory setting: Pin 2 / white (MF): NPN normally closed (light switching), PNP normally open (dark switching), Pin 4 / black (QL1 / C): NPN normally open (dark switching), PNP normally closed (light switching), IO-Link |
| Switching mode | Light/dark switching |
| Switching mode selector | Via IO-Link |
| Signal voltage PNP HIGH/LOW | Approx. VS – 2.5 V / 0 V |
| Signal voltage NPN HIGH/LOW | Approx. VS / |
| Output current Imax. | ≤ 100 mA |
| Response time | ≤ 0.5 ms 3) |
| Switching frequency | 1,000 Hz 4) |
| Connection type | Cable, 4-wire, 2 m 5) |
| Cable material | PVC |
| Conductor cross section | 0.13 mm² |
| Cable diameter | Ø 3.6 mm |
| Circuit protection |
A 6) B 7) C 8) D 9) |
| Protection class | III |
| Weight | 130 g |
| Housing material | Plastic, ABS |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Ambient operating temperature | –40 °C … +60 °C 10) |
| Ambient temperature, storage | –40 °C … +70 °C |
| UL File No. | NRKH.E189383 & NRKH7.E189383 |
- 1) Limit values.
- 2) Without load.
- 3) Signal transit time with resistive load in switching mode. Different values possible in COM2 mode.
- 4) With light/dark ratio 1:1 in switching mode. Different values possible in IO-Link mode.
- 5) Do not bend below 0 °C.
- 6) A = VS connections reverse-polarity protected.
- 7) B = inputs and output reverse-polarity protected.
- 8) C = interference suppression.
- 9) D = outputs overcurrent and short-circuit protected.
- 10) Avoid condensation on the front screen of the sensor and on the reflector.
Phương thức giao tiếp
| Phương thức giao tiếp | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Thời gian chu kỳ | 2.3 ms |
| Độ dài dữ liệu xử lý | 16 Bit |
| Cấu trúc dữ liệu xử lý |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 … 15 = empty |
| VendorID | 26 |
| DeviceID HEX | 0x8001DD |
| DeviceID DEC | 8389085 |
Smart Task
| Smart Task name | Base logics | ||||||
| Logic function |
Direct AND OR Window Hysteresis |
||||||
| Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
||||||
| Inverter | Yes | ||||||
| Tần số chuyển đổi |
SIO Direct: 500 Hz 1) SIO Logic: 500 Hz 2) IOL: 217 Hz 3) |
||||||
| Thời gian đáp ứng |
SIO Direct: 1 ms 1) SIO Logic: 1 ms 2) IOL: 2,3 ms 3) |
||||||
| Repeatability |
SIO Direct: 1 ms 1) SIO Logic: 1 ms 2) IOL: 2,3 ms 3) |
||||||
|
|||||||
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
Diagnosis
| Device status | Yes |
| Quality of teach | Yes |
| Quality of run | Yes, Contamination display |
Brand
Sick
Sản phẩm tương tự
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang