Cảm biến IRT-P212E40
Thông số kỹ thuật cảm biến quang Sick IRT-P212E40
đại lý sick | đại lý IRT-P212E40 | sick việt nam
nhà phân phối sick | nhà phân phối IRT-P212E40
Thông số kỹ thuật chung Sick sensor
| Nguyên tắc chức năng | Photoelectric proximity sensor |
| Nguyên tắc chức năng detail | Background suppression |
| Actuator | Pneumatic, valve on board |
| Max. number of sensors |
Approx. 30 1) Approx. 50 2) |
| Logical principle of operation | Single accumulation |
| Type of Release | Single release, block (slug) release |
| Dimensions (W x H x D) | 50 mm x 147.4 mm x 48.9 mm |
| Phạm vi cảm biến max. | 60 mm … 900 mm |
| Phạm vi cảm biến | 60 mm … 900 mm |
| Focus | 7° |
| Loại ánh sáng | Infrared light |
| Nguồn sáng | LED 3) |
| Kích thước điểm sáng (khoảng cách) | Ø 20 mm (500 mm) |
| Angle of dispersion | 7° |
| Điều chỉnh | Potentiometer, 9 turns |
| Special applications | ZoneControl |
- 1) When powerd from the end of the IR daisy chain.
- 2) When powerd from center of the IR daisy chain.
- 3) Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
Mechanics/electronics
| Supply voltage | 19.2 V DC … 27.6 V DC 1) |
| Ripple | pp 2) |
| Current consumption | 20 mA 3) |
| Switching output | PNP |
| Signal voltage PNP HIGH/LOW | Approx. VS – 0.5 V / 0 V |
| Output current Imax. | ≤ 100 mA |
| Response time | 2 ms |
| Switching frequency | 250 Hz |
| Connection type | Male connector M12, 4-pin |
| Connection type for daisy chain | Cable with female connector, M12, 4-pin 2 m |
| Circuit protection |
A 4) C 5) D 6) |
| Protection class | III |
| Weight | 175 g |
| Housing material | Plastic, ABS |
| Enclosure rating | IP65 |
| Shock and vibration resistance | According to IEC 68 |
| Ambient operating temperature | –10 °C … +55 °C |
| Ambient temperature, storage | –40 °C … +75 °C |
| UL File No. | NRKH.E189383 & NRKH7.E189383 |
| Medium for valves | Compressed air or neutral gases filtered, non-lubricated or lubricated |
| Design solenoid valve | 3/2-way valve |
| Mode of operation solenoid valve | Air to Drive (NC) |
| Connection type solenoid valve | Compressed air 2 x 8 mm diameter, output line 4 mm diameter |
| Coil ratings | 24 V DC 2 W |
| Air flow rate | Approx. 20 Nl/min |
| Ventilation capacity | Approx. 130 Nl/min |
| Operating pressure range | 2 bar … 8 bar |
- 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load and valve deenergized.
- 4) A = VS connections reverse-polarity protected.
- 5) C = interference suppression.
- 6) D = outputs overcurrent and short-circuit protected.
Safety-related parameters
| MTTFD | 1,227 years |
| DCavg | 0 % |
| B10d | 20,000,000 Switching cycles 1) |
- 1) Only for devices containing electro-mechanical components. In this case, the MTTFD value of the entire device must be calculated from the given B10D value, the number of switching cycles and the given MTTFD value.
Pneumatic
| Coil ratings | 24 V DC 2 W |
| Medium for valves | Compressed air or neutral gases filtered, non-lubricated or lubricated |
| Design solenoid valve | 3/2-way valve |
| Connection type solenoid valve | Compressed air 2 x 8 mm diameter, output line 4 mm diameter |
| Air flow rate | Approx. 20 Nl/min |
| Ventilation capacity | Approx. 130 Nl/min |
| Operating pressure range | 2 bar … 8 bar |
Classifications
| eCl@ss 5.0 | 27270904 |
| eCl@ss 5.1.4 | 27270904 |
| eCl@ss 6.0 | 27270904 |
| eCl@ss 6.2 | 27270904 |
| eCl@ss 7.0 | 27270904 |
| eCl@ss 8.0 | 27270904 |
| eCl@ss 8.1 | 27270904 |
| eCl@ss 9.0 | 27270904 |
| eCl@ss 10.0 | 27270904 |
| eCl@ss 11.0 | 27270904 |
| eCl@ss 12.0 | 27270903 |
| ETIM 5.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| ETIM 7.0 | EC002719 |
| ETIM 8.0 | EC002719 |
| UNSPSC 16.0901 | 39121528 |
Brand
Sick
Related products
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang