Cảm biến WL2SGC-2P3234B01
Thông số kỹ thuật cảm biến quang Sick WL2SGC-2P3234B01
đại lý sick | đại lý WL2SGC-2P3234B01 | sick việt nam
nhà phân phối sick | nhà phân phối WL2SGC-2P3234B01
| Nguyên tắc chức năng | Photoelectric retro-reflective sensor |
| Nguyên tắc chức năng detail | Autocollimation |
| Dimensions (W x H x D) | 7.7 mm x 21.8 mm x 13.5 mm |
| Housing design (light emission) | Rectangular |
| Phạm vi cảm biến max. | 0 m … 1.2 m 1) |
| Phạm vi cảm biến | 0 m … 0.55 m 1) |
| Loại ánh sáng | Visible red light |
| Nguồn sáng | PinPoint LED 2) |
| Kích thước điểm sáng (khoảng cách) | Ø 12 mm (250 mm) |
| Độ dài sóng | 640 nm |
| Điều chỉnh | IO-Link |
| Pin 2 configuration | External input, Teach-in input, Sender off input, Detection output, logic output, Device contamination alarm output |
| AutoAdapt | ✔ |
| Special applications | Detecting transparent objects |
| Special features |
Detecting transparent objects Factory setting: pin 2 / white: input, teach-in |
- 1) Reflector P250F.
- 2) Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | pp 2) |
| Current consumption | 20 mA 3) |
| Switching output | PNP |
| Switching mode | Light/dark switching |
| Switching mode selector | Dark switching (pre-setting) |
| Output current Imax. | ≤ 50 mA |
| Response time | 4) |
| Response time Q/ on Pin 2 | 300 µs … 450 µs 4)5) |
| Switching frequency | 1,000 Hz |
| Switching frequency Q / to pin 2 | 1,000 Hz 5)6) |
| Connection type | Cable with M8 male connector, 4-pin, 200 mm 7) |
| Cable material | PVC |
| Cable diameter | Ø 3 mm |
| Circuit protection |
A 8) B 9) D 10) |
| Protection class | III |
| Polarisation filter | ✔ |
| Housing material | Plastic, ABS/PC |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Special feature | Detecting transparent objects |
| Ambient operating temperature | –20 °C … +50 °C |
| Ambient temperature, storage | –40 °C … +75 °C |
| UL File No. | NRKH.E181493 |
| Repeatability Q/ on Pin 2: | 150 µs |
- 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Signal transit time with resistive load.
- 5) Valid for Q on Pin2, if configured with software.
- 6) With light/dark ratio 1:1.
- 7) Do not bend below 0 °C.
- 8) A = VS connections reverse-polarity protected.
- 9) B = output reverse-polarity protected.
- 10) D = outputs overcurrent and short-circuit protected.
| MTTFD | 1,788 years |
| DCavg | 0 % |
| TM (mission time) | 20 years |
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Cycle time | 2.3 ms |
| Process data length | 16 Bit |
| Process data structure |
Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 … 15 = empty |
| VendorID | 26 |
| DeviceID HEX | 0x800124 |
| DeviceID DEC | 8388900 |
| Smart Task name | Base logics | ||||||
| Logic function |
Direct AND OR WINDOW Hysteresis |
||||||
| Timer function |
Deactivated On delay Off delay ON and OFF delay Impulse (one shot) |
||||||
| Inverter | Yes | ||||||
| Switching frequency |
SIO Direct: 1000 Hz SIO Logic: 1000 Hz IOL: 900 Hz |
||||||
| Response time |
SIO Direct: 300 µs … 450 µs 1) SIO Logic: 500 µs … 600 µs 2) IOL: 500 µs … 900 µs 3) |
||||||
| Repeatability |
SIO Direct: 150 µs 1) SIO Logic: 150 µs 2) IOL: 400 µs 3) |
||||||
|
|||||||
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
Brand
Sick
Sản phẩm tương tự
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang
Cảm biến quang