Cảm biến WTR1-P421A10P03
Thông số kỹ thuật cảm biến quang Sick WTR1-P421A10P03
đại lý sick | đại lý WTR1-P421A10P03 | sick việt nam
nhà phân phối sick | nhà phân phối WTR1-P421A10P03
Nguyên tắc chức năng | Photoelectric proximity sensor |
Nguyên tắc chức năng detail | Background suppression |
Actuator | Pneumatic, valve on board, with magnetic valve |
Max. number of sensors |
23, End Tap, 24 V supply voltage, 3 ft zones 18, when powerd from the end of the IR daisy chain 32, End Tap, 28 V supply voltage, 3 ft zones 26, End Tap, 28 V supply voltage, 6 ft zones 46, Center Tap, 24 V supply voltage, 3 ft zones 36, Center Tap, 24 V supply voltage, 6 ft zones 48, Center Tap, 28 V supply voltage, 3 ft zones 48, Center Tap, 28 V supply voltage, 6 ft zones 60, Dual Center Tap, 24 V supply voltage, 3 ft zones 48, Dual Center Tap, 24 V supply voltage, 6 ft zones |
Logical principle of operation | Single accumulation, single release, block (slug) accumulation, block (slug) release |
Dimensions (W x H x D) | 51.5 mm x 157 mm x 46 mm |
Phạm vi cảm biến max. |
100 mm … 900 mm 3.9 in … 35.4 in |
Loại ánh sáng | Infrared light |
Nguồn sáng | LED |
Kích thước điểm sáng (khoảng cách) |
Ø 40 mm (900 mm) Ø 1.6 in (35.4 in) |
Điều chỉnh | Potentiometer |
Special applications | ZoneControl |
Special features | With short conveyor upgrade bracket |
- 100 W source, 1 m power supply cable.
- Tuổi thọ trung bình: 100,000 h at TU = +25 °C.
Supply voltage | 21.6 V DC … 28.8 V DC 1) |
Ripple | pp 2) |
Current consumption | 67 mA 3) |
Switching output | PNP |
Switching mode | Dark switching |
Signal voltage PNP HIGH/LOW | Single accumulation mode VS – ≤ 2.0 V (beam blocked) / 0 V (beam unblocked) |
Output current Imax. | ≤ 100 mA |
Response time | 2 ms |
Switching frequency | 250 Hz |
Connection type | Male connector M12, 4-pin |
Connection type for daisy chain |
Predecessor: cable with female connector, M12, 4-pin, 1.2 m Upstream: connector M12, 4-pin |
Circuit protection |
A 4) C 5) D 6) |
Protection class | II 7) |
Weight | 168 g, 5.9 oz |
Special device | ✔ |
Housing material | Plastic, Glass fiber reinforced ABS plastic |
Enclosure rating |
IP54 NEMA 3 |
Shock and vibration resistance | According to IEC 68 |
Ambient operating temperature | –10 °C … +55 °C |
Ambient temperature, storage | –40 °C … +75 °C |
Medium for valves | Compressed air or neutral gases filtered, non-lubricated or lubricated |
Design solenoid valve | 3/2-way valve 8) |
Mode of operation solenoid valve | Air to Drive (NC) |
Connection type solenoid valve | Compressed air 3/8 ” diameter, control line 1/4 ” diameter |
Coil ratings | 24 V DC 1 W |
Air flow rate |
40 Nl/min 1.4 SCFM |
Ventilation capacity | 40 Nl/min, 1.4 SCFM |
Operating pressure range |
0 bar … 4.5 bar 0 psi … 65 psi |
Response time solenoid valve |
Partially open, 10 ms Open, 23 ms Close, 21 ms |
- 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) With solenoid valve.
- 4) A = VS connections reverse-polarity protected.
- 5) C = interference suppression.
- 6) D = outputs overcurrent and short-circuit protected.
- 7) Reference voltage: 50 V DC.
- 8) Other valve types available on request.
Coil ratings | 24 V DC 1 W |
Medium for valves | Compressed air or neutral gases filtered, non-lubricated or lubricated |
Design solenoid valve | 3/2-way valve 1) |
Connection type solenoid valve | Compressed air 3/8 ” diameter, control line 1/4 ” diameter |
Air flow rate |
40 Nl/min 1.4 SCFM |
Ventilation capacity | 40 Nl/min, 1.4 SCFM |
Operating pressure range |
0 bar … 4.5 bar 0 psi … 65 psi |
Thời gian đáp ứng solenoid valve |
Partially open 10 ms Open 23 ms Close 21 ms |
- 1) Other valve types available on request.
eCl@ss 5.0 | 27270904 |
eCl@ss 5.1.4 | 27270904 |
eCl@ss 6.0 | 27270904 |
eCl@ss 6.2 | 27270904 |
eCl@ss 7.0 | 27270904 |
eCl@ss 8.0 | 27270904 |
eCl@ss 8.1 | 27270904 |
eCl@ss 9.0 | 27270904 |
eCl@ss 10.0 | 27270904 |
eCl@ss 11.0 | 27270904 |
eCl@ss 12.0 | 27270903 |
ETIM 5.0 | EC002719 |
ETIM 6.0 | EC002719 |
ETIM 7.0 | EC002719 |
ETIM 8.0 | EC002719 |
UNSPSC 16.0901 | 39121528 |